Products >> Pinball Cables / Wire Harnesses >> Gottlieb System 1 MPU to Driver Harness

Brand New Gottlieb System 1 MPU to Driver Cable

(1) *BRAND NEW* replacement cable for MPU-to-Driver harness on Gottlieb System 1 Machines. Connects A3-J1 to A1-J5. All parts used are brand new including the long obsolete 2x Molex 24pin connector housing.

Original cables are often damaged from battery corrosion or have had their Molex pins fatiqued and are no longer providing proper connections between the MPU & Driver boards. A brand new cable will ensure you have good connections between the MPU & Driver board. Note that the unique Molex connectors that were used for these cables are obsolete and unobtainable. We have limited stock of brand new connector parts, but these are more expensive cables because of this limited stock.

Please verify game compatibility.

This cable will work with an original MPU & Driver Board in the following Gottlieb System 1 games:

  • Asteroid Annie
  • Buck Rogers
  • Charlie's Angels
  • Cleopatra
  • Close Encounters
  • Count Down
  • Dragon
  • Genie
  • Incredible Hulk
  • Joker Poker
  • Pinball Pool
  • Roller Disco
  • Sinbad
  • Solar Ride
  • Torch
  • Totem
*Note: We do not have compatibility info for any repro Gottlieb System 1 MPU boards. These cables are wired the same as the original cables and are intended for use with original Gottlieb System 1 MPUs. They should work on repro boards, however please verify compatibility with the repro board manufacturer BEFORE purchasing.


PURCHASING OPTIONS:

  • DIY Kit (YOU ASSEMBLE)

    Requires assembly. This is an option for DIY'ers and includes all parts needed to assemble your own MPU-to-Driver cable (new wire, Molex 0.156 terminals, wire ties & brand new Molex connectors). You will need a Molex crimping tool for assembly that handles 0.156 terminals. It does take time to crimp the cables, however we make the actual wiring of the connectors very easy with included instructions.
  • Fully Assembled

    Fully Assembled MPU-to-Driver cable that is plug-and-play, tested & ready to install in your machine. These take a bit of time to assembly, so the additional cost for our time to crimp & assemble these harnesses is factored in. We may not always have this option available, depending on time constraints.




MOLEX 24-PIN CONNECTOR HOUSING

Just need 2x of the 24-pin Molex connector housing?

These ORIGINAL Molex 24-pin connector housings are long obsolete and unobtainable. Luckily, we have a limited quantity of brand new old stock available that was purchased over 10 years ago.

These are SOLD IN PAIRS. THIS IS FOR 2x OF THE MOLEX CONNECTOR HOUSING ONLY (see picture above of the plastic connector housing).

NOTE: Does not include any any wire or other parts, labels or instructions.
This is just for 2x of the bare 24 position Molex connector housing.

Price: $24.95



RETURN POLICY / WARRANTY INFORMATION

New and unused items can be returned within 2 weeks of receipt and must be in resaleable condition. Products that were damaged during installation or that show signs of use will only be eligible for a partial refund. Returns are only accepted with prior authorization, so please email us to let us know you would like to return an item. Buyer pays for return shipping. Original shipping costs are not refunded.

Pinitech LLC offers a 180-day limited warranty against defects on all ASSEMBLED products manufactured by Pinitech. Warranty does not cover improper installation or modifications beyond intended use. DIY Kits are handled on a per-case basis and limited to parts replacement only. Due to their nature, we cannot warranty assembly done by others on DIY Kits.

LIABILITY INFORMATION

This product was designed ONLY for the purpose as stated in the product description. Pinitech LLC cannot control conditions of installation or use (ie. inadequate repairs of machines, improper installation, aftermarket modifications, etc). End user agrees to assume any and all liablity of this product. In no event shall Pinitech LLC be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products.

TECHNICAL SUPPORT

If you have any issues with using this product, please email us! We're happy to help answer your questions & will do our best to resolve any problems you may be having.
You can email us using the information on the Contact page. We usually respond within 24-48 hours.


SHIPPING INFO
Pinitech products are only shipping to addresses within the United States. We do not ship to non-US addresses.
Most orders ship USPS First Class Mail and ship out in 1-2 business days. Orders over 1 pound ship USPS Priority Mail.

Privacy Policy | Return Policy | Contact
Original Material is ©2013-2024 Pinitech.com
Other material is copyright of its respective owner(s)