Products >> Pinball Memory Modules >> Gottlieb System 1 NVRAM Module

Gottlieb System 1 NVRAM Module

No more batteries!

This is a Nonvolatile RAM (NVRAM) Replacement for Gottlieb System 1 Pinball Machines. Replaces the 5101 RAM at Z22 on an original Gottlieb System 1 MPU board. These modules use CYPRESS F-RAM nvram ICs rated at 151-year data retention & 100 trillion reads/writes. Absolutely no batteries are needed to retain your high scores or game settings, you can remove them from your game. Machine pin headers are used on this module which are very durable and won't damage your socket at all.

REQUIRES SOLDERING / MODIFICTION OF MPU!
Please note that upgrading to nvram on Gottlieb System 1 MPUs will require removal of the existing RAM soldered to the board & installation of a 22-pin DIP socket. In addition to this, CR26 on the MPU board should be replaced with a wire jumper or zero ohm resistor.

WHY REPLACE YOUR EXISTING RAM WITH NVRAM?
Unfortunately battery corrosion damage is much too common in games that used alkaline batteries for powering the RAM when the pinball machine is off. Many people have reported that even new batteries from major brands can sometimes leak after a year or two for no apparent reason. The corrosive alkaline can leak or wick into the board and over time will destroy the copper traces on the board and any ICs it comes in contact with. Don't let this happen to your game!

Compatibility:

  • Asteroid Annie
  • Buck Rogers
  • Charlie's Angels
  • Cleopatra
  • Close Encounters
  • Count Down
  • Dragon
  • Genie
  • Incredible Hulk
  • Joker Poker
  • Pinball Pool
  • Roller Disco
  • Sinbad
  • Solar Ride
  • Torch
  • Totem

NVRAM is shipped in anti-static foam & anti-static bag inside a small USPS First Class Mail box. Installation instructions are included.



Gottlieb System 1 NVRAM Module
Price: INTRODUCTORY SALE! - 19.95 each
Regularly $24.95ea

Include Free IC Socket Per Module?




SHIPPING AVAILABILITY
  This item ships only to United States, Canada & Australia

SHIPPING INFO
ASSEMBLED "Pinitech" PCBs are manufactured in the US and are currenty only shipping to the United States, Canada & Australia.
DIY Kits and Bare Boards may be available to other international customers. See below for details.

Australia, Canada Customers:
There is a minimum order of $25 (before shipping) due to higher international postage costs. Orders exceeding $400 or 4 pounds in weight must ship Priority Mail International & you will be contacted if additional shipping costs are due. Full order value is declared on customs declarations, no exceptions.

Other International Customers:
We do not currently ship assembled pcbs to EU at this time. Paypal is configured to accept only orders from United States, Canada & Australia.


All original material is copyright 2018 Pinitech.com
Other material is copyright of its respective owner(s)